Types of wells

Oil wells come in many varieties. By produced fluid, there can be wells that produce oil, wells that produce oil and natural gas, or wells that only produce natural gas. Natural gas is almost always a byproduct of producing oil, since the small, light gas carbon chains come out of solution as it undergoes pressure reduction from the reservoir to the surface, similar to uncapping a bottle of soda pop where the carbon dioxide effervesces. Unwanted natural gas can be a disposal problem at the well site. If there is not a market for natural gas near the wellhead it is virtually valueless since it must be piped to the end user. Until recently, such unwanted gas was burned off at the wellsite, but due to environmental concerns this practice is becoming less common. Often, unwanted (or 'stranded' gas without a market) gas is pumped back into the reservoir with an 'injection' well for disposal or repressurizing the producing formation. Another solution is to export the natural gas as a liquid.Gas-to-liquid, (GTL) is a developing technology that converts stranded natural gas into synthetic gasoline, diesel or jet fuel through the Fischer-Tropsche process developed in Word War II Germany. Such fuels can be transported through conventional pipelines and tankers to users. Proponents claim GTL fuels burn cleaner than comparable petroleum fuels. Most major international oil companies are in advanced development stages of GTL production, with a world-scale (140,000 bbl/day) GTL plant in Qatar scheduled to come online before 2011. In locations such as the United States with a high natural gas demand, pipelines are constructed to take the gas from the wellsite to the end consumer.

Another obvious way to classify oil wells is by land or offshore wells. There is very little difference in the well itself. An offshore well targets a reservoir that happens to be underneath an ocean. Due to logistics, drilling an offshore well is far more costly than an onshore well. By far the most common type is the onshore well. These wells dot the Southern and Central Great Plains, Southwestern United States, and are the most common well in the Middle East.

Another way to classify oil wells is by their purpose in contributing to the development of a resource. They can be characterized as:

-production wells are drilled primarily for producing oil or gas, once the producing structure and characteristics are determined

-appraisal wells are used to assess characteristics (such as flow rate) of a proven hydrocarbon accumulation

-exploration wells are drilled purely for exploratory (information gathering) purposes in a new area

-wildcat wells are drilled based on a large element of hope, in a frontier area where little is known about the subsurface. In modern times, oil exploration in many areas has reached a very mature phase and the chances of finding oil simply by drilling at random are very low, and much more effort is placed in exploration and appraisal wells.

At a producing well site, active wells may be further categorised as:

-oil producers producing predominantly liquid hydrocarbons, but mostly with some associated gas.

-Gas producers producing almost entirely gaseous hydrocarbons.

-water injectors injecting water into the formation to maintain reservoir pressure or simply to dispose of water produced with the hydrocarbons because even after treatment, it would be too oily and too saline to be considered clean for dumping overboard, let alone into a fresh water source, in the case of onshore wells. Frequently water injection has an element of reservoir management and produced water disposal.

-aquifer producers intentionally producing reservoir water for re-injection to manage pressure. This is in effect moving reservoir water from where it is not as useful to where it is more useful. These wells will generally only be used if produced water from the oil or gas producers is insufficient for reservoir management purposes. Using aquifer produced water rather than sea water is due to the chemistry.

-gas injectors injecting gas into the reservoir often as a means of disposal or sequestering for later production, but also to maintain reservoir pressure.

Lahee classification

-New Field Wildcat (NFW) – far from other producing fields and on a structure that has not previously produced.

-New Pool Wildcat (NPW) – new pools on already producing structure.

-Deeper Pool Test (DPT) – on already producing structure and pool, but on a deeper pay zone.

-Shallower Pool Test (SPT) – on already producing structure and pool, but on a shallower pay zone.

-Outpost (OUT) – usually two or more locations from nearest productive area.

-Development Well (DEV) – can be on the extension of a pay zone, or between existing wells (Infill).